they can be turned on and off instantly

Borealis LED streetlights have a longer life, up to 50,000 hours, compared to the HPS life span of 20,000 hours. In addition to reduced maintenance, Borealis LED streetlights have a very high color rendition and produce a sharp, pure color without glare. They feature an instant “on” with no cold starting compared to HPS street lights, which typically take several minutes to achieve full brightness. PolyBrite’s patented led high bay technology, used in all Borealis lamps and lighting systems, will reduce the city’s operating costs, including lower energy usage and reduced maintenance and bulb replacement.

Motion sensors and lighting controls can also be used with Borealis LED lighting since they can be turned on and off instantly. Furthermore, Borealis LED streetlights are better equipped to withstand extreme hot and cold temperatures and provide more control over what is illuminated, thus reducing light pollution, making it an ideal solution for public lighting applications.An improved product mix that accommodates a high portion of LED panels boosted the company's gross margin to 15.8 percent in the second quarter from 12.8 percent in the first quarter.

According to Paul Peng, executive vice president of AUO's Global Business Unit, LED panels accounted for 22 percent of its total panel production in the second quarter, beating the global LED panel ratio of 17 percent. AUO's LED panel ratio is expected to rise to 30 percent in the third quarter and reach 50 percent in the fourth quarter.

LED makerCree to complete the first phase of the massive lighting upgrade at Singapore's historic and significant Jurong Town public housing estate. Built to meet the Singaporean government's highly precise and stringent standards, this installation is the largest public led high bay light makeover that the Singaporean government has ever conducted in history.

the light sources can be made smaller and smaller

Following Fab 12 and Fab 14,Fab 15 will be TSMC's next "green fab", incorporating green concepts in energy conservation and pollution control in eco-friendly designs, including a process water conservation rate of 85 percent, reclamation of rainwater, recirculation and reuse of general exhaust heat, and development of solar power generation and led high bay applications.

Higher efficiency means greater output for the same current and lower power consumption in the relevant applications. There are also new design options because fewer chips will be needed and therefore less space to produce the same brightness. In addition, almost 50% less waste heat needs to be removed, which in turn considerably reduces the need for cooling. As brightness increases, the light sources can be made smaller and smaller.

The improved performance of the LEDs greatly expands the possible applications for this innovative light source. For example, exceptionally high efficiency means that warm white LED solutions can be produced with better quality of light and a better energy balance through color mixing than through the usual conversion of blue light.

Products contracted by three other buyers would likely add to the shipments, therefore Sunonwealth executives expected its shipments for the second half of this year to further surge. It's said that the company is verifying product samples with the buyers.led high bay light fans would likely increase to account for 8% of the company's total shipment for this year.

order commitment from an important customer

According to Epistar Sources, it is still being awaited for agreement from the board of directors, and until the board meeting at Epistar in August ,a final confirmation on this move will be made.Sources at Delta pointed out that Delta Electronics already has a plant for its LED Linear high bay light Devices in Dongguan, South China, and so this area will be a preferred location to be a base for the joint venture that they are entering into.This alliance signifies Epistar’s intentions to make further inroads into the LED lighting device arena and secure order commitment from an important customer. The group currently announces 290 MOCVD machines, and is also second in the global chipmaker positioning – having a 17 per cent of the total market share.

We are looking to carry out a major capacity increase for our nitride LED wafers so naturally we turned to AIXTRON. Their new generation CRIUS II systems have demonstrated major improvements such as higher growth rates, high pressure growth and the more than doubling of productivity. Therefore, I am convinced that the CRIUS II will meet our need for process flexibility, uniformity in thickness, doping, and composition. Our good relationship with the AIXTRON Group and their very responsive local support will ensure that we receive the best service with the installation and operation of the advanced CRIUS technology.”LED products and other electronic components. Its main products include digital audio and video ICs, power management ICs, LED drivers, DC motor drivers, etc. The Company distributes its products principally in Zhejiang province, China.

Bridgelux offers one of the industry's widest ranges of solid-state light sources, delivering 240 to 4500 "hot" lumens across a broad range of color temperatures.To help designers to develop high quality replacement lamps and luminaires for a market rapidly transitioning to led high bay light energy efficient lighting, this expansive portfolio of UL-recognized arrays provides designers with wide-ranging options.At present, Bridgelux products are suitable for purchase on Digi-Key's global websites and will be featured in future print and online catalogs.

LEDs are increasingly used in many different lighting applications

Compared to conventional light sources, such as incandescent lamps and energy-saving lights, LEDs are much more energy efficient. They last longer and offer many new design possibilities. Because of these advantages, LEDs are increasingly used in many different lighting applications.

“The LED market will see many new areas of application open up. We are committed to help our customers develop new technologies faster, technologies such as UV LEDs to sterilize water, LEDs in automobiles, and LEDs for general lighting," Said Junglin Tsai, Asia Pacific Manager of Marketing & Applied Technology, Evonik Cristal Materials Corporation.“Therefore, we want to be our customers’ strategic partner and a solution provider, rather than only providing the products. In this way, we can participate in their product developments by offering full-range technical services.”

The SAVOSIL™ lenses are produced using Evonik’s patented SiVARA™ Sol-Gel Technology which is environmental friendly and allows glass lenses of consistent quality to be manufactured in any desired shape. The process recently received the Frost and Sullivan European Technology Innovation Award. In addition, the SAVOSIL™ lenses produced with this special process meet all the requirements of the high-value LED market:LED Linear highbay light temperature stability, UV-resistance, 3D arrangement in complex geometries, customization to customer specs,etc.

the commercialisation of technology through industry collaboration

Tyndall National Institute, UCC is one of Europe's leading research centres, specialising in ICT hardware research, commercialisation of technology and the education of next generation researchers. The Institute has a critical mass of over 370 researchers, engineers, students and support staff focused on quality research and the commercialisation of led high bay light technology through industry collaboration. Tyndall addresses technological challenges, to provide solutions in the key areas of Communications, Energy, Health and the Environment, spanning research from atoms to systems in photonics, microsystems and micro-nanoelectronics.

More efficient LEDs and new occupancy sensing capabilities are increasing the applications for solar lighting and LightFair attendees will be the first to see Carmanah’s pioneering advancements that will change the way solar LED lighting can be used.Kuroda san of Taiyo Nippon Sanso adds: “We are very excited by this opportunity to collaborate with SemiLEDs. The SR 4000 provides superior and stable performance with a high through put while achieving the highest crystal quality and uniformity.”

SemiLEDs UV LEDs are made with their patented and proprietary MvpLED technology with features a vertical structure on a copper alloy base, providing excellent thermal management. SemiLEDs is at the forefront of developing UV LEDs that are greatly enhancing current applications and providing solutions that are poised to revolutionize the UV LED market.LED high bay lighting have had a growing impact on a large number of UV market segments including conformal coating, curing, printing, medical, security and forensics and biotechnology.

their goal to provide greater access to energy-efficient products for businesses

As part of the collaborative agreement with Efficiency Maine, the bulbs received third-party independent testing. With the test outcome more successful than expected, Efficiency Maine has agreed to assist the project with a commitment of more than $13,000 towards material costs. That commitment gives the Farnsworth confidence that the project is a worthy one and will assist Efficiency Maine in their goal to provide greater access to energy-efficient products for businesses and individuals across the state of Maine.

With oversight by the Farnsworth’s curatorial department, a rigorous review process identified two specific bulbs that satisfy lighting requirements for most of the museum’s galleries. The LEDtronics PAR30A-15W-XIW-001M LED bulb provides soft and unfocused light, while the led high bay light provides more focused light. Not only do the lamps adequately light the works of art using up to 85% less energy than incandescent lamps, but they also offer—with a CRI of 86—a wider spectrum of light more closely approximating natural light, thus eliminating the adverse color effects of typical incandescent bulbs.

In addition, in the long term the valuable artwork is spared from damaging UV rays that other types of lights are known to emit. LED bulbs produce no ultraviolet rays that traditionally fade the fine colors found in artwork. The new lighting has already been installed in the Library Gallery. Installation in other galleries and work areas will follow. The LED high bay lighting project is a multi-year effort that will make the museum a leader in environmentally responsible practices. Once this initial phase is installed, there will be further incandescent replacements with another 200-300 pieces of the PAR30 LEDs.

suppliers for their good faith and confidence through this ordeal

a leading manufacturer of lighted signs, announced that yesterday the U.S. Court of Appeals for the Federal Circuit in Washington D.C. overturned the earlier decision of the LED linear high bay light District Court in Cookeville, Tennessee, and ruled in favor of Fallon in its appeal of a patent infringement suit brought against Fallon by iLight Technologies. The Court vacated both the monetary judgment and the injunction that had been entered against Fallon by the District Court.

“This court decision is a major victory for our company and our customers,” said John Perrachon, Chief Executive Officer of Fallon Luminous Products. “We believe this ruling validates what we have said consistently since the lawsuit was filed—that our products do not violate iLight’s patents. While the case has been remanded to the district court, we believe it will be a simple matter to prove noninfringement in view of the appellate court's ruling. We thank our customers and suppliers for their good faith and confidence through this ordeal.”

The validity of iLight’s patents is the subject of separate proceedings in front of the U.S. Patent and Trademark Office led high bay light brought by another company. In March, the USPTO rejected all of the claims in one of iLight’s three patents that were at issue in the Fallon trial as being unpatentable. The USPTO is also reconsidering whether the other two patents asserted against Fallon should have ever been issued.

he has chosen to bring his energy and expertise to the team

The company has quickly reached the point when adding an executive with Mike's deep strategic and operational experience will be key to successfully supporting our growing network of customers and partners, and maximizing the company's market potential," said Tom Pincince, President and CEO of Digital Lumens. "Mike brings the right skill set and hands-on approach to help drive the rapid and widespread adoption of Digital Lumens' solution, and we are delighted that he has chosen to bring his energy and expertise to the team."

Recently Digital Lumens announced the industry's first Intelligent Lighting Solution that integrates LEDs, networking and software to reduce customers' lighting-related energy costs by up to 90%. Designed for large industrial facilities, the system includes best-of-breed,led high bay lights fixtures, each with on-board computing, sensing and built-in intelligence. The fixtures form a Smart Light Grid, or 'lighting network,' with system-wide intelligence and integrated controls that deliver energy-efficiency results that far surpass the results achievable with single "dumb" fixtures.

"Helping to drive innovative technologies into widespread market adoption has been the cornerstone of my management experience," said Michael Feinstein. "Digital Lumens has identified a real market need within rugged industrial customers who are motivated to reduce energy load, effectively manage lighting resources, and insulate their energy LED linear high bay light bills from the impact of rate increases. I look forward to helping the company tap this enormous market opportunity as customers embrace smart technologies that provide both energy efficiency and greater control over their resources."

similar organizations in promoting sustainability worldwide

Xicato is a dynamic Solid State Lighting company founded by seasoned industry professionals, with offices located in Silicon Valley, California (HQ), London, and Tokyo. Xicato develops, manufactures and globally markets LED modules that are functional replacements for traditional lamp technologies, offering all the life and energy-saving advantages of LED linear high bay light with no light technical or aesthetic compromises. Xicato provides industry best (plus) specifications via an open approach with a global circle of leading end-users, specifiers, and luminaire manufacturers.

As part of our corporate commitment to providing environmentally responsible products that reduce energy consumption, minimize light pollution and lower the carbon footprint, we are constantly working to align with IDA and similar organizations in promoting sustainability worldwide,” said Roy Burton, Group Chief Executive of Dialight. “Achieving certification for our StreetSENSE LED light fixtures through third party testing validates the product’s environmentally beneficial qualities. We’re proud to contribute to reducing light pollution and honored to gain the right to display the IDA Fixture Seal of Approval.”

The Dialight StreetSENSE fixtures combine precision optics with the latest in advanced LED technology to provide highly effective, energy-efficient, focused exterior lighting for roadways, parking lots, walkways and bike paths. The StreetSENSE Type II forward-throw led high bay light, with their IDA compliant reflector design, prevent direct glare and deliver high quality, precisely directed illumination downward where it’s needed, virtually eliminating upward light pollution and lateral light trespass.

the gap left by traditional methods of LED testing to become the first national standard

Labsphere’s high performance and strong local support were the deciding factors for the Institute in selecting its system. Locally made systems currently offer testing of only one parameter of a single, low-power LED at a time. The integrated system from Labsphere is able to perform a variety of optical and electrical test measurements on an array of up to 20 discrete LEDs, including high power lamps, in under 60 seconds.

During a single measurement sequence, the life test station simultaneously produces optical measurements of total spectral radiance and luminous flux, peak and dominant wavelength, full width/half max, CIE purity and CIE chromaticity, as well as forward current, leakage current and reverse voltage electrical measurements. Labsphere’s powerful software gathers radiometric, photometric and colorimetric parameters used for analysis that meets requirements set by the National Institute of Standards and Technology.

Labsphere’s life test station will enable the Institute to quickly and accurately test new products for its clients, increasing the reliability and energy performance of solid state lighting used in street lighting, architectural lighting and outdoor signage. There are no national standards for LED testing in China currently. The Institute hopes that this new system will bridge the gap left by traditional methods of LED testing to become the first national standard.

them to quickly deliver better products to the market

YAHAM customers now have access to our industry-proven led highbay light technology, allowing them to quickly deliver better products to the market, faster,” said Chuck Swoboda, Cree chairman and chief executive officer. “YAHAM TrueWhite? technology is already installed in thousands of locations including restaurants, retail stores, and others that demand both high-quality light and energy-efficiency.”

The YAHAM LED Module LMR4 uniquely integrates driver electronics, optics and primary thermal management, making the compact YAHAM module drop-in-ready. Designed to last 35,000 hours while consuming just 12 watts of power, it delivers 700 lumens at a warm-white color temperature of 2700 with a CRI >90. Fixture manufacturers have the option to include a specially designed heat sink to accommodate specific high-heat applications, like highb bay lights for insulated ceilings.We anticipate our new downlight will be available in summer 2010—and that’s less than six months from when we started working with prototypes of the module. In a fast-paced industry like lighting, this is a keen advantage for us.”

lower power consumption, higher dimming ratios and, because they do not require high-voltage and high-frequency inverter circuits, significantly reduced electro-magnetic interference (EMI). And since LED backlights contain no mercury, these displays offer a more environmentally friendly option as well.These displays also offer Optrex’s Natural Color Matrix (NCM) technology, a patented color transformation algorithm implemented in the hardware that provides real-time on-the-fly processing to precisely match the colors specified in a data source for exceptionally vivid color reproduction. Additional features include industrial standard CMOS and LVDS interfaces for easy system development.

society in general is more environmentally aware

This new single chip LED delivers record-breaking efficacy of 160 lumens per watt at 350 mA. The LED also delivers 750 lumens at 2 A, which is equivalent to the light output of a 60 W incandescent light bulb at less than 7 watts."This new platform continues Cree's well-established record of turning R&D innovations into products," said Chuck Swoboda, Cree chairman and CEO. "We continue to set the pace for LED performance, establishing new benchmarks that make you wonder why anyone would consider last-century's energy-wasting technology."

YAHAM recognizes and understands the fundamental changes taking place in the world today,” says Rudy Provoost,YAHAM Lighting and a member of the board of management of Royal YAHAM Electronics. “Lifestyles are changing, urbanization is presenting new challenges for city leaders, and society in general is more environmentally aware. We are applying the functional and creative potential of LED lighting to address these trends, and to simply enhance life with light.”

YAHAM is introducing a revolutionary concept in home ambiance: LivingAmbiance. Using a simple remote control, LivingAmbiance enables a room to be easily matched to the mood or the occasion, integrating multiple luminaires and lamps wirelessly to generate any desired type of ambient lighting.

LivingAmbience also incorporates YAHAM’ latest generation of LivingColors, the acclaimed range of consumer luminaires which enable thousands of colors to be chosen at the touch of a button. The new-shape range of LivingColors colored and white light luminaires build on this proposition by adding adjustable and dimmable white light for daily activities as well as offering more possibilities for ambiance creation.

supermarkets for food illumination as well as restaurants and offices throughout Europe

The Lumoluce range is characterised by outstanding performance and quality at a competitive price point, and is fully assembled and manufactured at Heerhugowaard in the Netherlands utilising high quality LED light sources and LEDs. Unique features of the range include sub-binning, where each colour supplied is tested and hand-sorted into a further nine sub-bins to provide an exact colour match across each individual LED supplied to a customer. Lumoluce also designs and manufactures its own drivers to maximise the performance and efficiency of its LED lights. As a result, it achieves power factors of better than 0.9 and very low harmonics. Lumoluce LEDs are widely used in major airports, supermarkets for food illumination as well as restaurants and offices throughout Europe. Its focus on delivering premium performance and quality at competitive pricing is leading to year on year growth in annual turnover of over 50% for Lumoluce.

Adrian Rawlinson, Managing Director of Marl International, commented, “Lumoluce shares Marl’s culture of achieving high levels of quality and performance by keeping control of the design, assembly and manufacturing processes. We believe that there will be strong market demand for this product range from customers who appreciate a consistent and high quality product at an affordable price.”

Peter Snoeck, Sales Director of Lumoluce, added, “Marl has excellent relationships with our key target customers in the UK, and helps these customers make the most of our very special product characteristics. The fact that they have their own manufacturing operation too helps them appreciate how our products are set apart.”

they do offer very attractive energy saving properties

SSL is both an important and exciting field. Financially, exponential growth is projected over the next few years as a result of regulatory changes and LED technology developments. SSL is equally exciting because of its energy efficiency and positive environmental impact. It offers products that benefit all stakeholders in terms of lower power consumption and longer product life span.

LEDs, though they do offer very attractive energy saving properties, have the potential to deliver higher quality and more controllable light sources than traditional lighting solutions. It is in the area of control that Light-Based Technologies offers an economical, best-in-class dimming, color-controllable, feed forward system to deliver these superior results.

By replacing the existing metal-halide fixtures and lamps, ASU anticipates reducing energy consumption by 1.5 million kilowatt hours per year, which can be compared to the annual greenhouse gas emissions from 208 passenger vehicles. The move to LEDs could deliver annual savings of up to $127,000 in energy and maintenance costs, and the new fixtures are projected to last 50,000 hours, or approximately three times longer than a typical metal-halide bulb.

the company to competing on an international playing field

The U.S. Department of Energy has identified the development of free-standing GaN substrates and their manufacture by HVPE as key technologies to enable reduced LED manufacturing costs with improved LED performance. Upon project completion, TDI’s high-volume manufacturing equipment will permit increased U.S. production of free-standing GaN substrates to meet growing global demand.

As Vice President of International Sales and Marketing, Arthur will be responsible for spearheading global sales and marketing of the company’s advanced LED lighting products and managing a network of international sales representatives and consultants.

I joined Sunovia to take on the challenges of marketing U.S.-designed and -manufactured products on a global scale,” Arthur said. “My primary goal is to help EvoLucia gain market share in an ever-evolving competitive global environment. My entrepreneurial American marketing spirit will allow me to lead the company to competing on an international playing field.”

It is the one place in the world where visitors

Otsuka said the laser segment was not the same with LED as major companies and manufacturers were involved in the business. In a related development, Otsuka said the company had secured big deals with government agencies in the printing segment.Our main focus is corporate and government agencies and small and medium entrepreneurs to take up Brother's products," he said. However, he declined to divulge on Brother's take-up rate in government agencies.

LED technology and energy efficiency are transforming the lighting industry, with the market for LED products estimated to grow significantly over the next 15 years," said Keith Williams, UL's President and CEO. "With the acquisition of LTL we continue to advance public safety worldwide and are well positioned to meet the growing market demands for third party testing for performance and energy efficiency of LED products."

The Shenzhen International Lighting Exhibition is much more than a trading hub,” explains Mr Jason Cao, General Manager of Messe Frankfurt in China. “It’s the meeting place for the world’s lighting industry.  Key players in the global lighting industry are attracted to visit the show by the vast range of lighting products, technology and services ever assembled in an Asian destination, together with our highly respected fringe programme. It is the one place in the world where visitors and exhibitors can gain an overview of what’s happening in both the Asian and global lighting industries.

Lighthouse will have a promising future in the China LED large screen market

yahamlighting.com content editor Zheng Fuhua said, "As a world leading LED display enterprise, Lighthouse has conquered the European and North American markets by rolling out the right products at the right time. Since the 2008 Olympic Games in Beijing, demand for LED display solutions has been growing rapidly in the China market with an increasingly high requirement for product quality. We note that brand awareness of Lighthouse grew significantly in the China market in 2009, and I believe that Lighthouse will have a promising future in the China LED large screen market."

Lighthouse had a good year in 2009, winning many large-scale projects worldwide including the Wuhan Tianhe Airport, the Shanghai Railway Station, several world famous brands’ stores, the American Airline Center, the Rose Bowl Football Stadium in US, Ocean advertising screens in UK and many more. During its rapid business expansion, Lighthouse has also integrated its innovative, pioneering spirit into the R&D of new products, and rolled out several groundbreaking solutions. One such product is the HELIOS High Efficiency LED Informative Operations System, which has helped further consolidate Lighthouse’s leadership in product innovation. The double award win is the biggest, most well-deserved recognition of the company’s progress in the Chinese market ever.

Upon receiving news of winning of the two awards, Lighthouse General Manager Peter Chan was very pleased, saying "With the support and attention of so many users and industry experts, Lighthouse has had an extraordinary 2009 in both the China and international markets. We will focus on vigorous innovation and R&D of LED technology, and we will continue to strengthen our investment in the Chinese market and look forward to providing advanced video display solutions to Chinese and global customers."

Bridgelux is the only vertically integrated LED manufacturer

Bridgelux is a leading developer and manufacturer of technologies and solutions that will transform the $100 billion lighting industry. Based in Silicon Valley, Bridgelux is a pioneer in solid-state lighting (SSL) and is greatly expanding the market for light-emitting diode (LED) technologies by driving down costs of LED lighting systems. Bridgelux's patented proprietary light source technology replaces traditional technologies (such as incandescent, halogen and fluorescent lighting) with integrated, solid-state lighting solutions that enable lamp and luminaire manufacturers to provide high performance and energy-efficient white light for the rapidly growing interior and exterior markets, including street lights, commercial lighting and consumer applications. With more than 225 patents worldwide, Bridgelux is the only vertically integrated LED manufacturer and developer of solid-state light sources that designs its solutions specifically for the lighting industry.

Funded by the German Federal Ministry of Education and Research (BMBF) for a total period of three years, So-Light (Special organic Light) will focus on specific OLED applications, such as special lighting systems and displays. The technological focus will be on novel materials (transport materials, triplet emitter, redox dopants and matrix materials), improved optical systems and on process technologies for small molecule based OLEDs. As part of the latter element, AIXTRON will take the lead in this area through the optimization of its proprietary OVPD* (Organic Vapor Phase Deposition) technology. Other project deliverables will be application studies and demonstrator devices for specific applications such as automotive or architectural lighting and backlights for large displays.

LED lighting manufacturer, delivered record 2009 revenues with over 37% year-over-year growth and an exceptional increase in December shipments of over 250%. In Q4 2009, Albeo also tripled their manufacturing space into two buildings at their Sterling Circle location in Boulder and added new manufacturing jobs. The company attributes their success to delivering innovative, high quality, long lasting,led high bay light products that outperform traditional fluorescent and HID lighting solutions at competitive prices.

the great enthusiasm of our university students for LED lighting

The Program recognizes technology companies that have achieved the fastest rates of annual revenue growth in Asia Pacific during the past three years. The ranking recognizes the top 500 technology companies, both public and private, according to their revenue performance over the past three years.

which is transforming how we light our world by bringing LEDs and smart controls to scale globally. “This proof-of-concept demonstration of a solar-powered, LED-based solution in Copenhagen perfectly complements the work of the LightSavers program, which includes Philips in trials of outdoor LEDs in a number of cities including London, Mumbai, New York, Tianjin, and Toronto."

Professor Zhan Qingxuan, a renowned scholar in the building lighting industry and Professor and Ph.D supervisor at the School of Architecture in Tsinghua University has been appointed as Chairman of the Contest Review Committee. “Registration for the contest shows the great enthusiasm of our university students for LED lighting,” said Professor Zhan. “In less than three months, the Organizing Committee has received hundreds of submissions and we are very pleased to see some outstanding designs which are very creative yet practical.”

mainly because world`s top five LED developers

William Weissman, Rubicon's Chief Financial Officer said, "We expect both facilities to be fully operational by the end of 2011 and that this new capacity will increase our annual revenue generating capacity to at least $130 million once the facilities are fully operational. This estimate is based on today's pricing and certain assumptions related to our product mix."

According to Taiwanese official resources, in light of the upcoming sales boom in the LED industry, the Ministry of Economic Affairs (MOEA) is going to push for formation of an LED R&D alliance to assist Taiwanese LED manufacturers to obtain cross-licenses from patent possessors in the U.S., Japan and Europe to reduce patent infringement risks in the future.

Taiwanese makers in industries of optical discs, display panels and DRAM have been plagued by either patent infringements or enormous costs on patent licenses for years. Industry insiders note, they will likely encounter patent infringements more easily and spend more on royalty fees than before, mainly because world`s top five LED developers, namely Nichia, Toyota Gosei, Cree, Philips and Osram, have already reached cross-patent agreements with each another to further protect their inventions and, above all, make big money by charging royalty fees for use of their LED technologies.

you can read more:http://wiondow.blogspot.com/2014/08/the-expansion-of-large-diameter-post.html

an area will be invisible when it is not backlit

As mobile handsets have incorporated more capability and functions, the user interface of mobile handset devices and keyboards have become more cluttered and complex for the led high bay light. To address this situation, Avago has developed a patented Graphic Fusion Multimode Exchangeable technology to solve the issues of complexity and congested icons on keypads and keyboards. This backlighting solution from Avago, allows key characters to be overlapped and selectively illuminated. Moreover, the illumination areas are transparent to each other – an area will be invisible when it is not backlit. G2MEX is an ideal choice for phones with MP3 players or any multi-function handset, especially those with capacitive sensing keypads.

Conventional backlight solutions use six or more top-firing LEDs, but with a light guide just two side-firing LEDs are necessary to backlight display icons uniformly. As a result, with fewer LEDs, the system uses less power, requires less printed circuit board (PCB) area and has a longer battery life. Typical applications that are ideal for Avago’s light guide solution include Plunger on LGF, multi-segment backlighting, and Graphic Fusion Multi-Mode Exchangeable applications.

To raise capital for capacity expansion, Huga has issued 18 million new shares which are valued at NT$540 million, according to the report, and all have been procured by Inventec.Taiwan’s largest LED packager, is also one of Huga’s shareholders, who spent NT$500 million on convertible bonds issued by the latter.

LED component technologies will bring tremendous business opportunities in LED lighting

Chairman of Macroblock, shares is "Trend of LED Display". He thinks the LED display driver IC will be on the same PCB board in the near future and will import more power-saving technology, so that power consumption on the LED screen will become more efficient and that the color correction and gray-scale capability of a product will be enhanced. In addition, he said that RGB clusters, architectural lighting, and LED screen rental market trends will be the focus, while LED Driver IC market will continue to grow.

James Chu, Director of ITRI Opto-Electronics and System Application Division, presents "The Creative Technologies Development of magnetic-field enhances LED", stressing that the 200ml/W LED component technologies will bring tremendous business opportunities in LED lighting. At the same time, WB and Schottky-type AC LED deign can greatly enhance the luminous efficiency of AC LED, accelerating the construction of AC LED industrial chain and the AC LED products. Additionally, the ITRI’s M-LED increased the electric current uniformity and IQE, in order to use the change of LED magnetoresistive effect and binding energy, created by the external magnetic field. This is completely different from the current LED technologies, opening up another door for LED technology.

a provider of digital power IC systems products and technology, recently announced the release of the iW3610 Digital Controller for dimmable led high bay light applications. It is the industry’s first digital LED driver IC with primary side regulation which eliminates the need for an opto-coupler thereby reducing bill-of-material costs, and increasing the mean time between failure (MTBF). The iW3610 eliminates flicker and improves efficiency and reliability for dimmable LED lights of 25W or lower wattage.

YAHAM Lights is a pioneer in LED landscape fixtures

ColorReach TR Powercore offers over 5,000 lumens of output, light projection of over 500 feet, and the ability to natively generate millions of colors and dynamic effects without the need for maintenance-intensive colored gels, filters, or mechanical scrollers. New royal blue led high bay light are standard with ColorReach TR Powercore to offer deeper, more saturated color projection in theatrical and touring projects. iW Reach TR Powercore produces intense washes of tunable white light in color temperatures ranging from a warm 2700 K to a cool 6500 K. With over 10,000 lumens of output and light projection of over 800 feet, iW Reach TR Powercore significantly outperforms competitive fixtures on the market.

Both fixtures offer a range of entertainment- and stage-specific features, including a lightweight yoke for mounting to pipes, trusses, and stands, and an optional accessory holder for freestanding installations. Available spread lenses, barndoors, top hats, egg crate louvers, and other accessories slide into the accessory holder for easy swapping. Optional 16-bit control provides ultra-smooth dimming.

Manufacturing since 2004, YAHAM Lights is a pioneer in LED landscape fixtures. The YAHAM Lights’ product line is engineered completely around the leading LED technologies. They run exhaustive tests throughout the development cycle ensuring every product will have exceptional quality, outstanding value, and unparalleled reliability.

“YAHAM Lights’ LED outdoor lighting fixtures are made of solid brass or copper,” says Young. “They provide the Outdoor Lighting Perspectives’ clients with the quality they are accustomed to.”

LED products for general illumination

Total energy savings (including more efficient light source, reduced consumption from occupancy sensors, reduced demand on the compressor, and reduced illumination levels) is estimated to be 2,659 kWh per year for a typical 5-door case. The reduction in illumination was pre-approved by the site in order to bring down the first cost of the installation.

Calculated simple payback from energy savings alone was approximately six years; maintenance savings were estimated to further reduce the payback to just over five years; and potential area rebates and tax credits could further reduce the payback period to less than two years.It’s said that, this LED lighting demonstration is one of many DOE Gateway demonstrations that showcase high-performance LED products for general illumination.

The proprietary GaN-on-Si technology was developed by Magdeburg, Germany-based Azzurro Semiconductors over the last six years. It enables the growth of thick and crack-free GaN-layers on silicon substrates with an excellent crystal quality and minimum bow, says Azzurro. Most led high bay light epiwafers are grown using sapphire or silicon carbide substrates as the starting material on which to deposit GaN-based multilayer LED structures. Wafer sizes range from 2 to 4 inches. The use of larger, lower-cost silicon substrates could lead to significant device-cost reductions, provided that high quality device layers can be grown successfully.

the newest products in a vast line of LED components for luminaire manufacturers

A provider of LED light engines, announces a new line of LED modules for luminaires utilizing Thermadjust(TM) technology. Thermadjust is a revolutionary new concept for LED modules that further enhances the usability of LED technology for general illumination. Developed specifically to decrease the likelihood of LED failure in high temperature environments, Thermadjust causes the LED modules to automatically adjust their output if ambient thermal conditions exist that could potentially cause the LED devices to fail prematurely. Using the LED device manufacturer's LM80 test data (for lumen maintenance) and ENERGY STAR requirements, the modules are intelligently engineered to ensure the junction temperature of the LEDs will always be maintained at or below levels required for proper performance and long life of the LEDs.

"The performance of luminaires with electronic devices in them such as LEDs can be adversely affected by elevated temperatures," says Chris Primous, Director of Sales and Business Development for Brillia. "Luminaires that contain LED modules with Thermadjust won't face premature luminaire failure and field issues due to overheated LEDs."

Utilizing Thermadjust, Brillia introduces the BB03 AV series LED modules as the newest products in a vast line of LED components for luminaire manufacturers. The series features a constant voltage design using three LEDs on a small rectangular circuit board. The modules, which can be easily grouped together in luminaires to create any desired level of led high bay light, are particularly suited for use by luminaire manufactures facing potentially challenging thermal conditions in the application of their products.

presents an overview of efficiency losses

The SSL2102 is the latest addition to NXP’s lighting portfolio, offering deep dimming down to one percent of full light intensity, as well as compatibility with a wide range of dimmers. The small, highly integrated and highly efficient driver is the next step in SSL retrofit LED lighting, and is ideal for small form-factor applications with closed casings.

NXP’s new online design tool for SSL applications makes it easy for engineers to evaluate and test the behavior of LED lighting applications based on four NXP products, including the new SSL2102 and SSL2101 for dimmable applications, as well as the SSL1522 and SSL1523 for non-dimmable applications. The tool enables engineers to quickly select the IC they need and test designs for LED drivers from 2W up to 25W. The tool generates schematic, component and transformer parameters, calculates the design’s efficiency, and presents an overview of efficiency losses.

The concept of SMASH is to establish disruptive approaches that exploit nanostructured compound semiconductors to realize the key market factors of high efficiency and low cost. These will be achieved by epitaxial growth of LED structures on ultra-low defect nanostructured templates and by the development of LEDs based on nanorod emitters. These approaches will have large impact on manufacturing costs because they enable growth on large area, low cost substrates such as Silicon.

where space savings or a wider angle of intensity is critical

The industry proven 50 mm trackball provides a comfortable and accurate control over the cursor. The KSML106-LED has an IP65 sealing grade and is available as front panel mount version or as enclosed version and has a PS/2 or USB compatible output both for keyboard and trackball.

Sunmax was founded in 1973 and is committed as a proficient manufacturer and exporter with professional skills, real-time response and constant product development. In order to better service its customers, Sunmax obtained ISO 9002 approval and ISO 9001: 2000 approval in 2000.

"One of the key components of this relationship with Sunmax is Xodtec’s reliance on the support of Sunmax’s distribution channels which will be introducing our indoor LED lighting products into popular stores including Home Depot, Menards, Costco, Lowe`s, Ace, Do it Best and True Value," stated Curtis Su, Chairman of Xodtec Group USA, Inc. "These are well-known brands in the U.S. and we believe this relationship will give led high bay light, Inc. a tremendous selling advantage over our competitors and opens doors to previously unavailable markets. Customers will have greater access to Xodtec`s products and experience the advantages that traditional lighting cannot provide."

Available in top-mount, reverse-mount and side-mount configurations, the eight surface-mount IR devices released today offer impressive levels of radiant power and intensity. The surface-mount emitters are perfect for applications such as presence detection, level detection and compact remote control units where space savings or a wider angle of intensity is critical. These packages are of industry standard footprint – 0603, 0805, 1206, PLCC and TO220 – and can be easily assembled onto printed circuit boards using standard automatic placement equipment.











You can read more:http://wiondow.blogspot.com/2014/08/leds-warrants-for-long-life-while.html

All products submitted were judged on various criteria

To receive not just one but two awards is yet another sign of our commitment to building top quality products that are not just functional, but also excellent in design,” commented James Liang, President and CEO of Aeon Lighting. “We are proud to be the only Asian manufacturer to have received such accolades from such a widely respected organization.”

All products submitted were judged on various criteria, including degree of innovation, quality of design, technological aspects, workmanship, choice of materials and environmental impact, as well as several others.

The board can show a single high-definition video feed or be divided into multiple zones (windows) to show a wide variety of statistics, information, graphics, animations and video. Two auxiliary 23mm displays are installed at Rutgers Stadium. Each measures approximately 38 feet high by 23 feet wide and will work in conjunction with the HD display to keep Rutgers fans involved in the game with scoring, sponsor and other game-related information.

The agreement will apply to worldwide sales of LED-based luminaires developed and marketed by all of the Acuity Brands businesses. Through the agreement, Acuity Brands will be able to incorporate Philips’ patented technologies related to the development and digital control of LED systems for general lighting, architectural and theatrical applications.

This license agreement with Acuity follows earlier agreements of Philips with key lighting players like Zumtobel and Osram. Philips’ licensing program combines many LED luminaire-related inventions of Philips and several of its acquired companies to simplify the use of LED technologies by third parties. Apart from leveraging this strong position to provide best-in-class led high bay light applications and solutions, Philips aims to speed up market adoption and growth by making available its market-leading patented technologies to third parties.


You can read more:http://wiondow.blogspot.com/2014/08/led-drivers-can-be-used-for-keypad.html

marketer of next-generation digital LED lighting technology

Mounting the Reflex is quick & simple with the included Flat Surface Mounts, while Tube Mounts and Vertical Mounts are available accessories. Each Smart Light is offered in four beam patterns: Narrow, Spot, Flood/Wide and Elliptical Euro Beam, and each light can be configured for multiple beam pattern combinations.

The IP69 rated Reflex is manufactured with 6061-T6 extruded aluminum, extensively CNC machined and enclosed with a single uncompromising o-ring seal, creating a strong, lightweight, weatherproof housing. The integrated performance heat sink provides extreme cooling in the worst environments, thus reducing LED temperatures, increasing light output and extending life expectancy. X7R thermal rated electronics power the Reflex for ensured durability and unyielding operation.

Lunera Lighting, a designer, manufacturer, and marketer of next-generation digital LED lighting technology, is set to begin selling its premium products of ultra-thin, energy efficient LED light panel fixtures. The company will initially target the commercial general lighting market. Lunera was founded and is led by a broad range of top industry influencers, lighting physicists, engineers, artisans, and marketers. Lunera began shipping products during the fourth quarter of 2009.

Don Peifer and business partner Mark Walsh started Lunera Lighting in December 2007 with the intention of bringing the next-generation of digital solid-state light (SSL) led high bay light to the commercial market. They envisioned transforming lighting into an efficient digital technology and uniquely approached the challenges by designing a complete fixture lighting system.

The development of innovative Lightengines for lighting purposes at streets

In the coming years, about one third of the existing street lightings will be replaced by more energy efficient alternatives. Following the success in Walsleben, the LED development in Germany provides a solution to light up streets, both domestic and international.

PSI Group develops, manufactures and supplies innovative lighting solutions based on Light Emitting Diodes (LED). Major segments are street lighting and exterior lighting. Lumenova GmbH as part of the PSI group is supplying so called “Lightengines” to manufacturers of street lighting and to the affiliated company 2K Moxa Lighting. LED lighting has clear advantages for the customer: it offers double-digit energy reduction, is nearly maintenance free thus impressively reducing operating expenses.

The development of innovative Lightengines for lighting purposes at streets, large squares, pedestrian crossings and bicycle paths is protected by patent applications. LED light source, optical distribution and electronic steering are integrated into a closed system cassette.

PSI Group is a young technology company which emerged from the former Panasonic picture tube factory as management buy-out. The longtime knowhow in advanced manufacturing led high bay light technology and electronic systems is the basis for the development of innovative products in highest quality and sustainable customer benefits.

we have begun offering limited samples of an S2 flux bin

This establishes a new level of performance for LEDs,” said Paul Thieken, Cree director of marketing, LED components. “We now deliver lighting-class efficacy at 1A drive current. In addition, we have begun offering limited samples of an S2 flux bin, providing up to 400 lumens at 1A. We target availability of XP-G neutral and warm white LED samples by end of calendar 2009.”

XP-G LEDs extend the leadership of Cree’s lighting-class LED family, giving lighting designers a wide range of price and performance options that all share a common package footprint. The cool white XP-G LED is available now with order codes up to 139 lumens minimum at 350 mA and led high bay light cool white bins (5000K – 8300K CCT) through the Cree distribution network.

The products of Havells Sylvania using P4 series are characterized by their innovative design, taking the form of sports stadium light. Two kinds of products are released, including Stadium PRO and Stadium EVO, spotlights with a high color rendering index(RA=93). Stadium PRO has been specifically designed for use within museums and galleries with an onboard dimmer system, long life time(50,000hrs), and no IR or UV, while ‘Stadium EVO is ideal for retail applications.

LED P4 series delivered to Havells Sylvania are respectively W42180 (Pure White), S42180 (Natural White), N42180 (Warm White) and 16 pieces are applied to each module. Combined with Seoul Semiconductor’s own phosphor technology, Z-Power LED P4 series have a higher luminous efficacy and reliability with improved brightness, and these products boast the world’s best luminous efficiency with one chip. They can be applied not only to general lighting fixtures but also to other various areas such as architecture lighting, decoration lighting, flashlights as well as cars.

Makers are hoping the cancellation of licensing duties in coming months

Thanks to lower outlay resulting from fast advancements in solid-state lighting, prices are already down 10 to 20 percent from 2008 levels. With the imminent lapsing of patents, quotes are forecast to decrease at least 10 percent.

LED bulb and tube suppliers said competitively priced products will help improve market uptake. This is crucial especially now that the US and the EU have started banning or limiting the use of light sources with high power consumption such as incandescent bulbs. At present, designs are about 10 times more expensive than halogen versions, with wattage contributing heavily in determining prices. Most end-users therefore tend to choose the latter even though LED lamps are more energy efficient and have a longer service life.

Makers are hoping the cancellation of licensing duties in coming months and the subsequent reduction in prices will change this situation and hasten product acceptance.

LED lighting solutions to businesses, municipalities and educational facilities. As part of the agreement, Visible Light Solar will utilize IES’s vast network of professional electricians and technicians to help customers dramatically reduce their lighting energy expenses, maintenance costs and carbon footprint.

Visible Light Solar is the first commercial and led high bay light company to fully integrate LED lighting devices, solar power technology and advanced power management systems in exterior and interior lighting fixtures. The company’s broad line of solar/LED lighting applications operate up to 85 percent more efficiently than their standard counterparts. In addition to dramatically lowering energy consumption, Visible Light Solar’s LED solutions reduce ongoing maintenance costs through much longer lifetime expectancy than HID bulbs (five to 10 years versus one year for most HID bulbs). The bulbs are also resistant to thermal and vibrational shocks, and because they do not contain toxic materials like mercury, or require ballasts that often contain PCBs, they are more environmentally sustainable.

The LED backlight technology delivers a low power consumption

In addition, the new LED backlit LCD TV delivers an energy efficient, eco-friendly performance with an impressive reduction in energy consumption compared to conventional LCD TVs. The LED backlight technology delivers a low power consumption of 139W, producing less heat generation and boasting a backlight life of 100,000 hours and a six-star energy rating.

Sharp says that using its new X-Gen Panel with advanced pixel control, light leakage is minimized and more light is allowed to pass through for higher peak brightness. Excellent color reproduction is also generated by a 1080/24P signal used for reproducing film frame rates as experienced in the cinema. It also comes with a Fine Motion Advanced Technology for 100/120Hz frame rate conversion and a fast pixel response time of 4ms.

Equipped with a large-size LED package that measures approximately 15 x 15mm, the natural white type and the warm white type feature total fluxes of 810lm and 600lm, respectively. Power consumption of both LED light bulbs is 8.7V. And the luminous efficiency of the natural white type is 93lm/W, which is higher than those of any other similar products announced so far.

a global leader in LED lighting products

Sharp says that using its new X-Gen Panel with advanced pixel control, light leakage is minimized and more light is allowed to pass through for higher peak brightness. Excellent color reproduction is also generated by a 1080/24P signal used for reproducing film frame rates as experienced in the cinema. It also comes with a Fine Motion Advanced Technology for 100/120Hz frame rate conversion and a fast pixel response time of 4ms.

Lighting Science Group Corporation, a global leader in LED lighting products, will preview its next generation line of LED retrofit lamps that will be available in the fourth quarter of this year. The new line of lamps will have substantially increased light output compared to LSG's current line but will be available at about half the cost. LSG's new line of LED retrofit lamps has the potential to dramatically expand the market for LED lighting technology.

According to Zach Gibler, Chief Executive Officer of LSG, "Lighting Science is preparing to make energy efficient LED lighting available for a wider range of applications by delivering unrivaled performance for the price. Our new line of LED retrofit lamps will use approximately 80% less energy than the traditional lighting technology lamps they replace. In most applications, Lighting Science's new line of LED retrofit lamps should pay for themselves in well under one year based on energy savings alone. This rapid payback coupled with the exceptionally long life of LEDs will provide significant financial returns for customers and should result in strong market growth for these products.

you can read more: http://wiondow.blogspot.com/2014/06/the-advancement-of-our-core-led.html

On Chip addresses both problems with these new submount offerings

A global provider of Integrated Passive Devices (IPD), last week announced the ability to provide Silicon and Ceramic Carriers or Submounts for HB LED (High Brightness Light Emitting Diode) manufacturers. With major advantages of power savings, increased life expectancy and faster response time over traditional bulbs, HB LEDs are rapidly taking over many applications such as LCD backlighting, traffic lights, automotive lighting, camera flash and even standard lighting. HB LEDs are more efficient and longer lasting than both incandescent and CFLs.

HB LEDs are predominantly built with Indium Gallium Nitride technology. LEDs using InGaN come with several design challenges such as electrostatic discharge (ESD) sensitivity and package thermal coefficient of expansion (TCE) issues. InGaN chips are generally considered Class 1 devices and in many cases, a discharge of only 10 Volts can destroy such sensitive components. In comparison, static charge of up to 30,000 Volts is not uncommon and can be generated quite easily. Studies indicate that ESD damage to electronics and associated equipment is estimated at over $10 billion annually. ESD-damaged LEDs can appear dim, dead, shorted, or have low Vf or Vr. TCE mismatch between the LED chip and the lead-frame or package is another significant reliability threat.

On Chip addresses both problems with these new submount offerings. OnChip produces silicon and ceramic submount that serves as an inter-poser between the InGaN chip and the lead-frame. Submounts reduce the TCE mismatch, while providing ESD protection via integrated zener diodes. Ceramics are ideal for High Power LEDs and On Chip offers both Aluminum Oxide and Aluminum Nitride materials. The Company also provides miniature silicon ESD diodes that can be mounted alongside the LED chips. These ESD diodes are available both as flip chips - ESD0201 and as single-wire bond chips - ESD8x8. Submounts offer optical benefits as well. These devices contain solder bumps, enabling flip chip assembly of the LED chip. This approach eliminates shadows caused by wire-bonding. Furthermore, submounts offer a reflective metal surface which help direct the light in the desired direction.

LED light source provides vivid color saturation

Visible Light Solar, CEO Dee Dennis discusses the driving factors for developing current lighting products, such as the desire to reduce kilowatt hours and embrace the idea of putting energy availability back into the grid as opposed to using it.According to Dee, lighting innovation has been stagnating for a while, but today LED lighting is changing how we view the world.Dee also gives some examples of the savings customers are experiencing.  For example one customer went from 3000 watts to 213, this customer will realize those savings for years to come due to the longevity of LEDs.

The P410M allows auto play of media files from any USB storage device without connecting to a computer and the built-in multimedia player provides instant access to music, video and picture files. Standard audio, video and PC inputs easily connect to a laptop, camcorder, or DVD player, and two stereo speakers are placed strategically on both sides to make multimedia more enjoyable. The fan emits only 32 dB, which is quieter than the hum of a refrigerator and as whisper quiet as a library.Technology and LED light source provides vivid color saturation and high contrast displays. Colors are saturated up to 140% of NTSC color gamut, ensuring colors are accurate, crisp and vibrant.

The SBM-160 is a four-chip package consisting of individually addressable red, green, blue and white LEDs that generate more than 1,500 lumens of combined white light. The product utilizes a high-performance ceramic substrate resulting in an industry-leading thermal resistance of less than 1.5 C/W. A protective window covers the LED chips that emit directly into air, allowing for proximity optics that optimize collection efficiency and eliminate unwanted color fringing.Available in an SMT package, the SBM-160 integrates seamlessly with standard SMT manufacturing processes and equipment. PhlatLight LEDs are mercury-free, highly reliable and provide a lifetime of 60,000 hours with lumen maintenance of greater than 70 percent. The SBM-160 is available for sampling now with volume shipments starting in November.

An interactive temperature slider shows the results graphically

Thermal foldback combats high temperatures LEDs can reach as a result of environmental conditions.  When LED temperatures rise above a safe threshold, the lifetime and efficacy of the LED decreases.  With the LM3424, lighting designers can program temperature and slope breakpoints within which the LEDs operate safely.  When an over-temperature condition occurs, the LM3424’s thermal foldback circuitry reduces the regulated current through the LEDs.  The reduced current dims the LED to a range programmed by the designer and the LED remains within the range until it returns to a safe operating temperature.

This method of thermal foldback maintains the lifetime and efficacy of the LED and ensures the warranty period of fixtures in applications such as automotive headlights, high bay warehouse lighting and street lighting.National’s WEBENCH LED Designer helps lighting designers identify the ideal temperature threshold or foldback break point of the LEDs.  Traditionally, resistor values are calculated by hand to identify temperature foldback breakpoints.  The WEBENCH online design environment allows the designer to easily enter the temperature foldback and slope points and then visualize the behavior of the design at different LED temperatures.  This requires no hand calculations.  An interactive temperature slider shows the results graphically.The LED driver design automatically updates with entry of temperature breakpoint requirements.

Offered in a 20-pin thermally enhanced TSSOP package, the LM3424 drives up to 18 high-brightness LEDs in series with output current above 2A in a typical application.  It contains all of the features to regulate currents based on buck, boost, SEPIC, flyback and buck-boost topologies.The LM3424 operates over a wide input range of 4.5V to 75V.  The pulse-width modulation (PWM) controller is designed for high-speed capability including an oscillator frequency range that can be synchronized up to 2.0 MHz.  Additional features include PWM and analog dimming, programmable softstart and protection features such as low-power and thermal shutdown, and cycle-by-cycle current limit.

there are new product release plans to echo the market opportunities

The OLED panel displays textual information. And the inorganic EL panel is used as a backlight source to emit light from behind a color-printed film, giving animation-like effects to the image on the poster.The OLED panel is made with a polymer OLED material. OLED devices are formed on a glass substrate by using gravure printing technology. Compared with the evaporation method, it is possible to make larger, lower-cost panels in a shorter production time, DNP said.The OLED panel measures 32 x 192mm. The drive voltage and the luminance are 12V and 100cd/m2, respectively. DNP is planning to form OLED devices on a plastic substrate for the future.Veeco received a multi-system order for tools to be shipped to YAHAM Lumileds over the next two to three quarters.

Mike Pugh, Chief Procurement Officer at YAHAM Lumileds commented, “We have selected Veeco for several reasons. Veeco’s K465 ultimately provides a high level of automation, helps us reduce manufacturing costs, and provides a flexible platform as we look to the future. Additionally, our confidence level in working with Veeco’s systems and services is very high.Spurred by an influx of orders for the 2010 World Expo Shanghai, LED maker Macroblock’s revenues surged 30% MoM to $4.26 million in August; the growth momentum is expected to extend through September. Macroblock’s third quarter revenues is expected to reach $12 million, a QoQ growth of 34%, which is far higher than the previous estimate of 10~15% growth released at the investor’s conference.

Macroblock recorded total revenues of $16.8 million in the first half of 2009, decreased by 12.4% compared to that of the same period of last year. The consolidated gross profit margin reached 42.8%. The net income was $2.1 million with EPS of $0.069.During the recent investor’s conference, Robert Chen, General Manager of Macroblock remarked that there are new product release plans to echo the market opportunities in the LED field – in addition to demand from the traditional hot season and pending orders from the first half of the year, a series events held in China, such as World Expo 2010 Shanghai, Guangzhou Asian Games 2010, and Oct. 1st China National Day, will further spur demand for LED display and architectural lighting. Macroblock’s third quarter shipment is expected to hit a historic high, and gross margin may bottom out.

applications which require excellent colour reproduction

The modules give superbly balanced light, both in terms of colour reproduction and spread, making them suitable for many different types of light fitting. The test where made at a high correlated colour temperature (CCT), 4600Kelvin, and in future it is a strong possibility to achieve this performance at even higher CCT values. The colour rendering index value achieved by the Optodrive modules is far beyond the standards required of workplace lighting where tasks demand extra accuracy in colour perception. It is even possible to use these light sources in applications such as medical lights, kitchen lighting, food retailing, art galleries, fashion or clothes displays and similar applications which require excellent colour reproduction.

The demands of having a CCT that closely replicates the same temperature as a regular light bulb have driven the development of these modules. LEDs have had problems to meet the necessity for warm white light with colour temperature values between 2650K and 4500K with excellent CRI. The Optodrive modules completely satisfy this requirement.Compared to CCFL (cold-cathode fluorescent lamp) backlit displays, the mercury-free2 LED-backlit displays feature superior characteristics such as lower electromagnetic noise and lower power consumption, and offer a wider adjustable luminance range. Also, the new LED-backlit displays do not require the high-voltage and high-frequency circuits needed to control luminance in CCFL-backlit displays, thus enabling a higher level of flexibility in system design in terms of safety, electromagnetic interference (EMI) compensation, and system architecture.

Taiwan’s leading panel maker AU Optronics Corp. (AUO) recently decided to invest NT$30 billion (US$923.08 million) to establish four LED chip factories in Taiwan in the fourth quarter this year, to meet the strong demand for LEDs used in panel backlight modules, Taiwan Economic News reports, and the facilities is planned to begin mass production in late 2010.The four LED chip factories will be operated by AUO subsidiary Lextar Electronics Corp. AUO just poured NT$2.56 billion (US$78.6 million) to procure several metal organic chemical vapor deposition (MOCVD) equipment for expanding Lextar’s capacity. AUO is scheduled to use LED backlight for all its panel products by the end of 2010, creating a huge demand for such lighting source.

LED driver integrated circuit

Microsemi Corporation, a manufacturer of analog/mixed signal integrated circuits and semiconductors, announced the expansion of its line of complete high performance system solutions for powering light emitting diode (LED) backlit displays. The family now includes 3-string applications for 3.5 inch to 7-inch displays.

The new modules, designated LXMG1930-28(tm), join Microsemi's recently introduced LXMG1960-28(tm) high performance LED driver modules for 6-string applications. Together, the modules form a family that gives designers of medical, point-of-sale (POS), kiosk, ATM and lottery terminals a choice of easy "plug and play" options for their applications.

Based on Microsemi's LX1996(tm) LED driver integrated circuit, the new module family offers high performance features including 1 percent string-to-string current matching for optimum panel brightness uniformity, a wide 4.75V-28V input voltage capability, multiple dimming options with ratios up to 1,000:1, and safety protection against LED shorts, over-voltage and over-temperature operation.

The bridge project, which cost $18.2million, seeks to address the Mexican government’s stated goals of improving the welfare of its population and the country’s sustainability. The lights qualify as environmentally friendly as their LEDs are long-lived. By shortening distances the new highway, also helps reduce the amount of gas and emission of pollutants, according to Pachuca Mayor Francisco Olvera, who spoke at the bridge’s grand opening event.

LED lighting maker on the island

The company is developing a process to deposit a thin layer of carbon-based conductive material to form the electrical layer in electronic products. Plextronics is working on the materials as well as the manufacturing process, which is often described as akin to "printing" electronics.Print electronic technology promises to deliver low-cost products. Organic solar cells or LED lighting would use organic compounds for form the electrical layer rather than conventional materials such as silicon.In light of the bright outlook of LED industry, Taiwan's Formosa Plastics Group (FPG) and Yulon Group, have recently financed Trend Lighting Corp, a LED lighting maker on the island, according to Taiwan Economic News.

The two groups have each acquired 10% stake in Trend Lighting. FPG and Yulon have plowed capital into the company through LED affiliates Nan Ya Photonic Inc. and Precision Silicon Corp., respectively.Trend Lighting was founded in March 2008, and is currently capitalized at NT$280 million(US$8.4 million at US$1:NT$33). It has been awarded a NT$45 million (US$1.3 million) contract with Taichung County Government to supply around 2,000 LED streetlights.Taiwan’s Bureau of Energy estimated the global LED lighting market to reach over US$500 million in 2009. The ministry’s Industrial Technology Research Institute projected the market to grow to US$980 million next year, roughly representing 1% of global lighting market, according to the article.

developer and producer of solid-state lighting technology, announced last week that it has granted a license for its LED fluorescent tube replacement patents to Light Emitting Designs of North Barrington.We are pleased to be engaged as a licensee with ilumisys and its parent company, Altair Engineering,” said Tim Taylor, CEO of Light Emitting Designs. “The market for LED tube retrofits is significant and pegged for huge growth in 2010 and 2011. We are pleased to have secured that future growth by being a licensed provider.The licensing agreement provides for royalty payments to be made on a per-unit basis in exchange for having rights to manufacture and sell products covered by Altair’s patent portfolio.

already begun exploring streetlight

Celsia Technologies has been chosen by Taiwanese based United Innovation to cool the company's 9-, 11-, and 13-watt LED spotlights. Each of these spotlights includes a combination of United's unique multi-chip LED package along with Celsia's patented NanoSpreader vapor chamber.

United's spotlights are designed to use the company's proprietary flip-chip LED package which combines dozens of LEDs into a single high-brightness, low-cost solution. Meanwhile, Celsia has improved upon expensive, heavy vapor chamber thermal technology by reinventing its performance, weight, and cost characteristics to dissipate heat faster and at a lower cost than other alternatives.

Both companies hope to capitalize on what is predicted to be hyper-growth of the LED general lighting market during the coming years and have already begun exploring streetlight and downlight applications where NanoSpreaders can be used.

Enfis, a specialist in the design and manufacture of LED Light Engines for high-power Solid State Lighting (SSL), announces the formal launch of its Lighting Evolution Centre (LEC) in Swansea, UK.

The LEC enables Enfis customers to ‘evolve’ their lighting product portfolios quickly and effectively into efficient SSL solutions – either existing legacy products or new SSL-focused luminaires.

LED are displays such as fuel price

the provider of LED (light emitting diode) television and motion picture lighting equipment, announced that it will be awarded a Technology & Engineering Emmy(R) Award from the Academy of Television Arts & Sciences for its proprietary lighting systems. Litepanels fixtures are used on a variety of network television productions including such high profile programs as ''Desperate Housewives,'' Fox's ''24,'' and ''Without a Trace.'' The Emmy statue is the first in the Academy's 61 year history to be awarded for television lighting technology, and will be presented on Saturday, Aug. 22, at the Renaissance Hotel in Los Angeles.

The new fixtures will replace single, double and triple tube fluorescent water tight fixtures now in use as well as provide solid state replacements for existing fluorescent based berth lights. Once qualified, the new solid state fixtures will be available as lighting alternatives across the fleet.

Utilizing Energy Focus' proprietary Solid State Optical Delivery technology, the fixtures, to be developed over the next 12 months, must meet the Navy's new stringent requirements for LED systems which include light output, shock and vibration, corrosion, EMC and EMI compliance, efficiency, life, and maintenance specifications.The 60° beam angle of the LED has been optimized for display applications, so the light is focused for perfect viewing. The LED is therefore ideal as a replacement for conventional radial light emitting diodes. So far, it is also the only LED in a black package to provide the same luminous intensity as a comparable LED in a white package.

The target applications of the red and yellow LED are displays such as fuel price totem signs or public transport passenger information systems.

LED sales of the company grew by 23% in the second quarter from the previous quarter. And chief executive Hur Young said LEDs sales growth was expected to double in the second half of this year, according to the article.

LED drivers for smaller panels

Himax's white LED drivers were developed by Himax Analogic, Inc., a Himax subsidiary focusing on analog semiconductor solutions. The HA7305 is a white LED driver with 4.5V to 24V input voltage range and up to 44V output voltage; it drives up to 80 LEDs at 90% efficiency. The built-in LED balance control circuitry offers stable and uniform current in and between channels with less than 3% inaccuracy. Moreover, the HA7305 embeds patented PWM (Pulse Width Modulation) dimming control technology and protection features including over voltage, over current, over temperature and under voltage lockout protections.

Following the previously launched white LED drivers for smaller panels, HA7305 presents a milestone for Himax's white LED driver line to penetrate into larger panels, namely netbook and notebook applications. Looking forward, Himax expects to launch an integrated white LED driver with power management function at around the end of 2009, and will continue to expend its white LED driver offerings suitable for monitor and TV applications.

The lawsuit claimed that the United Kingdom firm's quantum dot technology infringes upon five seminal quantum dot patents held by Nanosys. In the settlement, Nanoco agreed to terminate its current U.S. business for its core-shell quantum dots. Those quantum dots were sold in the U.S. by its U.S. distributor, Sigma-Aldrich under the name Lumidots. In the settlement, Nanoco did not admit that the asserted patents are either infringed or valid. Additional terms of the settlement were not disclosed.

Both products can support LED lighting

We're pleased to bring to the market these innovative LED controllers that can significantly reduce the customer bill of material and design time," said Skip Wong, Vice President of Sales at Leadis. "The LED lighting market is starting to take off, with cost and reliability being critical factors that require continued improvement. Our LDS9001 and 9003 provide a straightforward cost reduction path for system lighting designers. Beyond lighting, these products can also be used in high power automotive and signage applications.headquartered in Sunnyvale, California, designs, develops and markets analog and mixed-signal semiconductors that enable and enhance the features and capabilities of portable and consumer electronics devices. Leadis' product offerings include LED drivers, which provide controlled levels of current required to drive light emitting diodes in diverse applications including mobile backlight units, and color display drivers, which are critical components of displays used in mobile consumer electronic devices.

The LDS9001 and 9003 offer one and three temperature sensing and control channels, respectively. Both products can support LED lighting, automotive, and signage applications. Since the LDS9003 supports multi-point thermal monitoring, it can also be used for multi-color LED applications, such as RGB. Eight I2C-programmable registers let users define the temperature de-rating profile as a function of the specific LED Diode used in the design. A 12-bit PWM generator with "smooth" logarithmic control supports the high temperature LED current de-rating adjustments. The PWM generator is programmable via an I2C serial interface. User programmed 8-bit codes are converted to 12-bit resolution logarithmic steps of ~ 0.17 dB per step. The PWM frequency is ~280 Hz to minimize noise generation. Interfaces are provided to support high side high LED current drivers and low cost microcontrollers in order to enable LED lighting designers to quickly and efficiently implement their electronics solution.

In today’s economy, tight profit margins are driving companies to seek technologies that combat rising energy costs and improve productivity with sustainable solutions. The need to reduce carbon emissions is real and lighting’s electricity consumption accounts for over 400 million tons of CO2 in the US atmosphere each year. LED lighting can be a big part of the answer to reducing energy and carbon emissions if done correctly.Albeo’s white paper examines critical differences in conversion technologies that determine performance, and lifetime.

These new products increase our addressable market by an order of magnitude

Nanometrics’ newest product for HB-LED process control is the RPMBlue. This is targeted at production control of Gallium Nitride (GaN)-based blue HB-LEDs that are increasingly used in LCD back-lighting. The system has been optimized for industry-leading throughput of up to 80 two-inch GaN wafers per hour.

Heptagon, the Finland-based developer of wafer-scale micro-optics, announced that it has raised over $22m in new equity financing. Most of this financing is coming from a new syndicate led by GGV Capital. Heptagon’s current investors, including Innovations Kapital of Sweden, Innovacom of France and Nokia Growth Partners have also participated in this latest round.

“Heptagon has a truly unique and proven value proposition: Optics which are glass-like in quality, being lead-free reflow and Telcordia compatible, but manufactured in the same wafer-scale format as the CMOS image sensor, LED and VCSEL technologies we support. This technology allows us to quickly ramp from several millions to several tens of millions of components per month and enables our customers to benefit from wafer-scale integration of optics with semiconductors,” says Chuck Milligan, Heptagon’s CEO. “This is leading to exponential growth in the demand for our products in applications such as CMOS Image sensing. We have introduced several new products this year, including 2 and 3 megapixel camera lenses. These new products increase our addressable market by an order of magnitude and therefore drive the need for a significant capacity expansion for which part of this new equity investment will be used.”

“We are extremely pleased,” Chuck continues, “to have been able to raise this investment despite the currently challenged investment environment. This is a testament to our strong leadership position in this industry-changing technology. We are also very excited with the quality and commitment of our new investors. GGV Capital and partners have a fantastic track record and will add great experience and knowledge of consumer electronics and Asian manufacturing to Heptagon’s investor base and board.”

the most energy efficient technology available

To reflect the firm's energy efficiency commitments, corporate social responsibility and community involvement, WAC Lighting has recently changed its brand standard to "Responsible Lighting." Helping to lead the industry's sustainability charge, the firm has contributed to social progress with responsible manufacturing practices and energy efficiency technology. The firm employs precision fabrication, stringent sourcing, water recycling, lead-free and zero-landfill capabilities in our wholly owned, clean ISO 9001-certified manufacturing campus.

New sustainable CFL and LED lighting products have been added to the extensive line with the most energy efficient technology available. As progress is measured in quality of life, WAC Lighting strives to advance employee empowerment, community involvement with major global and local foundations, and diversity in the workplace.

 The VerteX system is expected to be qualified into a new HB-LED development line, and the RPMBlue systems are expected to be qualified into the high-volume manufacturing line of a different customer. All systems are expected to be qualified in the third quarter of this year.

"Our customers are leveraging the increased capability of the VerteX system to address challenges in the rapidly-growing HB-LED market. New end-device deployments in area lighting, LCD back-lighting and an increased understanding of the performance and cost-of-ownership benefits of high-brightness LEDs are driving HB-LED development," commented Tom Ryan, Director of the Materials Characterization Business Unit at Nanometrics. "Our PL mapping products are well-positioned to support increased development and rapid production ramps as new high-brightness LED manufacturing technologies come online."
                     

Acriche is expected to be used for lighting products manufactured

Seoul Semiconductor’s Acriche can be used in commercial AC (Alternating Current) voltage applications without an AC-DC converter, and is attracting attention as the most promising LED lighting source for GU10 bases. Acriche GU10 bulbs may be used up to thirty to forty thousand hours, which is the LED’s own average life. In the case of common LED’s it is necessary to use an AC-DC converter as they are driven only by direct current. In some cases using the AC-DC converter may lead to a reduced life for the bulb if the converter has a shorter average life than the LED. Considering the long life of the Acriche GU10 as compared to a typical Halogen GU10, with an average life of only 2,000 hours, the Acriche GU10 lifetime meets or surpasses 15 to 20 Halogen GU10 bulbs. The product also uses much less power saving 75 percent of electricity compared to Halogen GU10. Even though the LED bulb will have a higher initial cost up to 70% savings can be realized over the lifetime of the product.

An official of Seoul Semiconductor said, “As lighting solutions using Acriche begin to be sold in Europe we are moving into full-scale commercialization of the AC-driven product. Acriche is expected to be used for lighting products manufactured by global leading lighting companies within the third quarter of this year and we expect Seoul Semiconductor’s share to increase even more in the European market.”

In addition, an official of Elgo said, “Acriche has already gained substantial popularity in the European lighting market, and we use Acriche in GU10 base so that we highlight the characteristics of this product to our clients, and it is expected to lead to a continuous increase in sales.”

Additionally Acriche is being recognized for its innovation, winning a variety of awards both at home and abroad. In 2008 the product received the Korea Technology Grand Prize presented by the Ministry of Knowledge Economy and was selected as one of ‘Korea’s Top 10 New Technologies.’ In 2006 and again in 2007 Acriche was awarded ‘Best Product Award 2007’ by Elektronik and E&E, two of Europe’s best electronics magazines. Acriche was also selected as one of the 'Hot 100 Products of 2007' by EDN, an American specialist magazine for electronic component products. Last April, CEO Chung Hoon Lee of Seoul Semiconductor received the Silver Tower Order of Industrial Service Merit on the 44th Day of Invention, as recognition of his contributions to the invention of Acriche.

commercializes technology based on semiconductor nanocrystals

Quantum dots, also known as nanocrystals, are a special class of materials known as semiconductors, which are crystals composed of periodic groups of II-VI, III-V, or IV-VI materials. Semiconductors are a cornerstone of the modern electronics industry and make possible applications such as the Light Emitting Diode and personal computer.Founded in 2000, Evident Technologies develops and commercializes technology based on semiconductor nanocrystals. Evident is one of the first companies to commercialize products based on semiconductor nanotechnology and has launched commercial products in LED and lighting, military and life science markets.

Semiconductors derive their great importance from the fact that their electrical conductivity can be greatly altered via an external stimulus (voltage, photon flux, etc), making semiconductors critical parts of many different kinds of electrical circuits and optical applications. Quantum dots are a unique class of semiconductor because they are so small, ranging from 2-10 nanometers (10-50 atoms) in diameter. At these small sizes, materials behave differently, giving quantum dots unprecedented tunability and enabling never before seen applications to science and technology.

an easy to use user interface LED driver

Energy and maintenance savings are equally as important as first cost in creating a sustainable solution," Mr. Kaveski continued. "Because our LED Parking Garage solution can pay for itself and generate significant savings over its long life even without considering rebates, we expect the strong interest we've received from pre-viewing the new line of fixtures with customers only to increase as the government's stimulus projects come on line later this year. In particular, we believe by offering an LED solution that's both affordable and efficient that we've addressed GSA Acting Administrator Paul Prouty's February call to convert parking garages to LED lighting."

YAHAM is a leading supplier of energy solutions and the world's only supplier of EFO(R), a lighting technology that is more efficient than conventional electric lamps. Energy Focus products are designed, manufactured and marketed for the commercial lighting and swimming pool markets. Energy Focus solutions provides energy savings, aesthetic, safety and maintenance cost benefits over conventional lighting. Customers include supermarket chains, retail stores, museums, theme parks and casinos, hotels, swimming pool builders and many others.A global designer and manufacturer of analog ICs for communications, industrial, medical and automotive applications, expands its comprehensive LED driver portfolio with the AS1115, an easy to use user interface LED driver. The AS1115 combines display driving and key scanning to provide a complete front panel solution which eliminates the use of secondary μP or other logics plus discrete devices, reducing BOM count and cost.

The AS1115 can drive either eight 7-segment digits or 64 individual LEDs with 47mA per digit or 5mA per LED. An external resistor can easily adjust the current. With an excellent accuracy of ±3%, the AS1115 improves picture quality for LED displays, this is due to minimised intensity variations between the LEDs and LED modules. For either global digital brightness control, or separate dimming, of each single digit a 4-bit PWM is implemented. Additionally the AS1115 offers the read back of up to 16-keys completing the single chip UI solution.

LED-based lighting solutions is growing rapidly

The initial phase of this program will involve the conversion of over 1,100 individual retail stores. LSI believes this program represents the largest single national conversion of conventional-to-LED based lighting ever undertaken.Energy savings were a major motivation for this conversion program. Work is already underway and revenues related to this new program will favorably affect fiscal year 2010.  Revenues for this phase of the project are expected to be between $22 million and $23 million.Additional follow-on conversions for this customer's stores not included in the initial phase are also possible later in fiscal years 2010 and 2011.

LSI has reached an agreement in principle to acquire a Columbus, Ohio based business, ADL Technology and related companies, that design, engineer, and manufacture custom designed circuit boards, assemblies, and sub-assemblies used in various applications including the control of solid-state LED lighting. Subject to completion of due diligence and finalization of a definitive purchase agreement, this acquisition is expected to close during the next 30 days.The purchase price is expected to be approximately $13 million, a significant portion of which is expected to be shares of LSI's common stock, plus the assumption of approximately $4 million of long-term debt.ADL has a history of profitable operations and the acquisition is expected to be accretive before giving effect to one-time transaction costs and non-cash amortization expenses.

These are two very positive developments for LSI Industries. Working together, our lighting and graphics business units were very effective in demonstrating to a major national customer the fundamental advantages and attractiveness of converting to solid-state LED lighting. Very clearly, the interest and momentum in LED-based lighting solutions is growing rapidly. Evidence of this interest in LEDs is everywhere, from trade shows to customer inquiries, to the popular press. LSI has taken the necessary steps to become a leader in providing advanced solid-state LED lighting products through its various Crossover(r) product lines which are designed to serve its core niche markets as well as the broad commercial and industrial lighting market. Naturally, we are very pleased to have been selected to provide our new energy saving products for the largest-to-date national rollout of solid-state LED lighting. I truly believe this is only the beginning of what will become a dominant trend as the many benefits of LED lighting drive the market.

the efficient volume production of world-class ultra-high brightness LED products

Although designed for portability, the Event MH W System and Event Brick System can also be operated as conventional “wired” fixtures, plugged into an electrical outlet, DMX console or both. They include AC multi-line voltage input, as well as built-in 3-pin XLR serial data connection.

Another convenient feature on the Event MH W System and Event Brick System is Remote DMX Addressing (RDMX). A user-friendly control board with 4-digit display is included on both units. In keeping with the fixtures’ go-anywhere design, the digital display can be turned 180° to fit different installation positions.

Chairman of Epistar, comments, "It is with great pleasure that we are looking forward to the delivery of our latest AIXTRON multiwafer MOCVD tool order. Our two companies have enjoyed a long-lasting relationship and AIXTRON has always provided us with the world’s best equipment."

"We have great confidence in the technology and the service that they provide. This is the foundation of our success for the efficient volume production of world-class ultra-high brightness LED products. We know that we can trust that our 150th AIXTRON MOCVD tool will be as useful as our first, and we are also looking forward to bringing our recently ordered systems on stream in the very near future.

the latest forecast by a market researcher released recently

In the last three years, Lebelight LED products have been used in numerous lighting projects including street lights, tunnel lights, miner lamps, screen backlights, office, factory, and family lights around the world with proved qualities and services.Lebelight was voted one of the most famous brands in China in 2008. Its LED spotlight won the "Create the Future Contest" in the United States in 2007.

The figure would be two times higher than the current 3% average in the global market this year, according to the latest forecast by a market researcher released recently.

The research house forecasts that LED TV shipments could grow to 3.6 million units this year. Next year, global LED TV shipments may increase to 15 million units, making up 10 percent of the global LCD TV shipments, the researcher said.

According to the report of the research firm, leading LCD TV manufacturers including Samsung, Philips, Sharp and Sony were planning to increase use of LED backlights in the second half of this year as cost of LED backlight drops.

Samsung’s LED TVs have received wide population in the US and Europe, with 400,000 units been sold since the debut, according to Samsung Electronics Taiwan Co president Smile Kim.

The fast uptake has caused supply constraints for some components such as LED chips, Kim said, adding that the company was communicating with Taiwanese companies to increase supply.

Separately, Samsung said it aims to expand its local market share to 10 percent by revenues after its new LED TV series hit the Taiwanese market this month, compared to 2 percent in the first three months of the year.Optically and thermally engineered, Amerlux’s recessed LED Wall Grazer features a discreet 2-inch aperture, uses high-output white LEDs, and consumes less than 12 watts per foot with visually stunning results.

will be the top supplier of LED backlit panels by the end of the year

Epistar President B.J. Lee noted that LED demand is turning larger than supply, making the market outlook for the third quarter quite bright.chairman of LED lead-frame maker I-Chiun Precision Industry Co., Ltd., pointed out that the island’s LED industry is currently saddled with shortage of expitaxy wafers as a result of robust orders.Lite-On President S.H. Lin estimated the global LED industry would still have 30 years of boom ahead in consideration of consistent rollouts of new applications for white LEDs. He noted that his company would introduce LED lighting fixtures in July, marking the company’s first step into LED lighting segment.Chipmaker Formosa Epitaxy Inc. has begun output expansion at its factory in Shandong Province of the mainland to cope with upcoming brisk orders.

will be the top supplier of LED backlit panels by the end of the year, seizing 32 percent of total market share, the report said. The company expects 70 percent to 80 percent of total notebook computer panels to use LED backlighting by the end of the year.Hannstar Display Corp will rank No. 2, followed by South Korean company Samsung Electronics Co, the researcher said.In the first quarter of 2009, shipments of LED backlit panels used in computers grew almost 8 times from the same period last year to 10.6 million units, the report showed. About 4.2 million units were shipped for netbooks, with 100 percent LED penetration, and 5.9 million for notebook PCs, with 26 percent penetration.Two years ago, about one-fifth of the 1,000 suppliers had the capability to make LED-equipped models. And less than 20 percent of their total production was allotted to the segment, as incandescent designs were mainstream.

By now, nearly all the suppliers boast regular manufacturing lines for LED Christmas lights. In fact, such types now account for 60 to 70 percent of the output in most factories.LED bulbs feature low power consumption, high heat tolerance and brightness, and last 20,000 to 100,000 hours, comparing with the average 3,000 hours for incandescent bulbs. What’s more, they function properly in temperatures of -40 to 80 C and can be switched on and off frequently without damaging the wires.Some Chinese makers are also adopting new power sources for the energy-efficient lights. For example, Shenzhen-based Ever Bright Electric Co. Ltd has developed LED Christmas lights that run on solar energy. China’s production of such models is projected to increase at an annual rate of 5 to 10 percent.