As the flashlights can heat up enough to pose a fire hazard, the U.S. Consumer Product Safety Commission announced to recall them. The recall involves 6-piece LED Flashlight Sets with flashlights made of silver led linear lighting plastic with black rubber around the handle and light base. The flashlight sets have UPC code 490021010049 printed on the back of the package. The sets include two small, two medium-sized and two larger flashlights ranging from three inches to 7 1/2 inches long.
According to research studies, lighting in schools can dramatically affect children’s health and their ability to learn. Children spend up to 40 hours per week in school buildings. Much of this time is spent under fluorescent lighting that emits hazardous radiation and radio frequency waves that contribute to a toxic “light polluted” indoor environment for students, teachers and staff.
The Enlightened Schools project was launched on FundaGeek, the crowdfunding site for technical innovation. Reaching their $112,000 goal will let SOL take this high performance school project from patent pending to production of LED technology that closely replicates natural sunlight referred to as full-spectrum light. Full-spectrum light research in schools has been shown to reduce hyper activity and learning disorders while improving health and performance in the classroom.
2015年9月21日星期一
2015年9月18日星期五
Eco-friendly features of the plant include solar panels
He noted that the company’s monthly revenue in the fourth quarter of 2011 will change only moderately and revenue for January, 2012, will slip from a month earlier because of the led high bay light holidays.Liu pointed out that inventories at the company’s customers are getting close to a minimum after quarters of destocking efforts. Most of Taiwan’s LED makers including his company have secured 70-80% of the contracts from global buyers.
Eco-friendly features of the plant include solar panels, LED lighting, water resource processing and renewable energy equipment that not only trims the annual power bill by NTD 5 million, but also reduces 1,000 tons of CO 2 emissions and uses about 75% less water (around 3,000 tons).
The planning and design of the Taoyuan Plant 3 and R&D Center was initiated in 2009. By adopting American LEED standards, the plant is expected to receive LEED Gold-rated certification in 2012 and will also earn EEWH Gold-rated certification by Taiwan's Ministry of the Interior.LEDS America has developed a breakthrough in creating an LCC- LED Cluster Chip technology light source to replace incandescent bulbs.
Eco-friendly features of the plant include solar panels, LED lighting, water resource processing and renewable energy equipment that not only trims the annual power bill by NTD 5 million, but also reduces 1,000 tons of CO 2 emissions and uses about 75% less water (around 3,000 tons).
The planning and design of the Taoyuan Plant 3 and R&D Center was initiated in 2009. By adopting American LEED standards, the plant is expected to receive LEED Gold-rated certification in 2012 and will also earn EEWH Gold-rated certification by Taiwan's Ministry of the Interior.LEDS America has developed a breakthrough in creating an LCC- LED Cluster Chip technology light source to replace incandescent bulbs.
2015年9月14日星期一
putting unemployed California residents back to work
Additionally, Lemnis has supplied more than 1,000 Pharox Solar Kits to schools in Zambian villages through the Empowered by led high bay light program. The nonprofit aims to donate 5,000 solar-powered lights across rural Zambian communities.
Established in April 2007, the RichmondBUILD Pre-Apprenticeship Construction Skills and Green Jobs Training Academy creates employment and career opportunities for Richmond residents and works to reduce violence in the Richmond community. The 14-week intensive program includes training in over 12 skill areas including basic electrical, basic welding, eco literacy and solar panel installation.
Richmond BUILD has received national and international recognition for its success in creating green jobs and putting unemployed California residents back to work.To date the program’s graduates have a 90% placement rate with an average wage of $18.33 and hour. Awards have included the 2007 FBI Director’s Community Leadership Award and the Conservation Champion Award by Senator Barbara Boxer.
Established in April 2007, the RichmondBUILD Pre-Apprenticeship Construction Skills and Green Jobs Training Academy creates employment and career opportunities for Richmond residents and works to reduce violence in the Richmond community. The 14-week intensive program includes training in over 12 skill areas including basic electrical, basic welding, eco literacy and solar panel installation.
Richmond BUILD has received national and international recognition for its success in creating green jobs and putting unemployed California residents back to work.To date the program’s graduates have a 90% placement rate with an average wage of $18.33 and hour. Awards have included the 2007 FBI Director’s Community Leadership Award and the Conservation Champion Award by Senator Barbara Boxer.
artistic dreams into a brilliant winter wonderland reality
This holiday season, Lighting Science Group is delighted to offer the gift of inspiration by providing the technology behind the Atlanta Botanical Garden's interactive lighting exhibition," said Jim Haworth, chairman and chief executive officer of Lighting Science Group. "By fusing led high bay light technology and an unmatched eye for design, Lighting Science Group's Advanced Projects Group has turned architectural and artistic dreams into a brilliant winter wonderland reality."
Based on the promising future that faster LED deployment will ensure the success of Europe's lighting industry and help reduce energy use from lighting by 20% by 2020, the demands for citizens and businesses to refine the policy are increasing. As a result, a consultation will run until 29 February 2012 to collect feedback on the Commission's ideas.
Digital Agenda Commissioner Neelie Kroes said: "Expanding LED lighting is a 'no-brainer'. It means more money in your pocket, and a healthier planet. Please give us your ideas on how to speed up its deployment and maximise the number of jobs and savings Europe can gain from expanding the use of LED lighting."
Based on the promising future that faster LED deployment will ensure the success of Europe's lighting industry and help reduce energy use from lighting by 20% by 2020, the demands for citizens and businesses to refine the policy are increasing. As a result, a consultation will run until 29 February 2012 to collect feedback on the Commission's ideas.
Digital Agenda Commissioner Neelie Kroes said: "Expanding LED lighting is a 'no-brainer'. It means more money in your pocket, and a healthier planet. Please give us your ideas on how to speed up its deployment and maximise the number of jobs and savings Europe can gain from expanding the use of LED lighting."
2015年9月11日星期五
system extending from fabrication of large sapphire crystals to substrate processing
SMM intends to inject the capital investment of ￥1.2 billion (US $120 million) including investment already completed. Through the led high bay light investment, SMM will construct a continuous production system extending from fabrication of large sapphire crystals to substrate processing.
Currently, 2- to 4-inch-diameter sapphire substrates are popular in the market. But it’s a tendency that the demand for larger-diameter substrates is increasing due to needs for cost reductions from LED manufacturers.
Production of 6-inch-diameter substrates requires the fabrication of large-size crystals, but according to SMM, production is technologically difficult and can be performed stably by only a small number of manufacturers worldwide.
Japanese based company NGK Insulators has released new wafer products for electronic device applications in ultra high brightness LEDs. It has showcased at SEMICON Japan 2011 held between December 7 through 9 at Makuhari Messe in Chiba for the first time. In the R&D line-up, there are bonded wafers that achieve new functions previously unavailable with a single material wafer, and GaN single crystal wafers that have low defect density and colourless transparency over the whole wafer surface.
Currently, 2- to 4-inch-diameter sapphire substrates are popular in the market. But it’s a tendency that the demand for larger-diameter substrates is increasing due to needs for cost reductions from LED manufacturers.
Production of 6-inch-diameter substrates requires the fabrication of large-size crystals, but according to SMM, production is technologically difficult and can be performed stably by only a small number of manufacturers worldwide.
Japanese based company NGK Insulators has released new wafer products for electronic device applications in ultra high brightness LEDs. It has showcased at SEMICON Japan 2011 held between December 7 through 9 at Makuhari Messe in Chiba for the first time. In the R&D line-up, there are bonded wafers that achieve new functions previously unavailable with a single material wafer, and GaN single crystal wafers that have low defect density and colourless transparency over the whole wafer surface.
system extending from fabrication of large sapphire crystals to substrate processing
SMM intends to inject the capital investment of ￥1.2 billion (US $120 million) including investment already completed. Through the led high bay light investment, SMM will construct a continuous production system extending from fabrication of large sapphire crystals to substrate processing.
Currently, 2- to 4-inch-diameter sapphire substrates are popular in the market. But it’s a tendency that the demand for larger-diameter substrates is increasing due to needs for cost reductions from LED manufacturers.
Production of 6-inch-diameter substrates requires the fabrication of large-size crystals, but according to SMM, production is technologically difficult and can be performed stably by only a small number of manufacturers worldwide.
Japanese based company NGK Insulators has released new wafer products for electronic device applications in ultra high brightness LEDs. It has showcased at SEMICON Japan 2011 held between December 7 through 9 at Makuhari Messe in Chiba for the first time. In the R&D line-up, there are bonded wafers that achieve new functions previously unavailable with a single material wafer, and GaN single crystal wafers that have low defect density and colourless transparency over the whole wafer surface.
Currently, 2- to 4-inch-diameter sapphire substrates are popular in the market. But it’s a tendency that the demand for larger-diameter substrates is increasing due to needs for cost reductions from LED manufacturers.
Production of 6-inch-diameter substrates requires the fabrication of large-size crystals, but according to SMM, production is technologically difficult and can be performed stably by only a small number of manufacturers worldwide.
Japanese based company NGK Insulators has released new wafer products for electronic device applications in ultra high brightness LEDs. It has showcased at SEMICON Japan 2011 held between December 7 through 9 at Makuhari Messe in Chiba for the first time. In the R&D line-up, there are bonded wafers that achieve new functions previously unavailable with a single material wafer, and GaN single crystal wafers that have low defect density and colourless transparency over the whole wafer surface.
system extending from fabrication of large sapphire crystals to substrate processing
SMM intends to inject the capital investment of ￥1.2 billion (US $120 million) including investment already completed. Through the led high bay light investment, SMM will construct a continuous production system extending from fabrication of large sapphire crystals to substrate processing.
Currently, 2- to 4-inch-diameter sapphire substrates are popular in the market. But it’s a tendency that the demand for larger-diameter substrates is increasing due to needs for cost reductions from LED manufacturers.
Production of 6-inch-diameter substrates requires the fabrication of large-size crystals, but according to SMM, production is technologically difficult and can be performed stably by only a small number of manufacturers worldwide.
Japanese based company NGK Insulators has released new wafer products for electronic device applications in ultra high brightness LEDs. It has showcased at SEMICON Japan 2011 held between December 7 through 9 at Makuhari Messe in Chiba for the first time. In the R&D line-up, there are bonded wafers that achieve new functions previously unavailable with a single material wafer, and GaN single crystal wafers that have low defect density and colourless transparency over the whole wafer surface.
Currently, 2- to 4-inch-diameter sapphire substrates are popular in the market. But it’s a tendency that the demand for larger-diameter substrates is increasing due to needs for cost reductions from LED manufacturers.
Production of 6-inch-diameter substrates requires the fabrication of large-size crystals, but according to SMM, production is technologically difficult and can be performed stably by only a small number of manufacturers worldwide.
Japanese based company NGK Insulators has released new wafer products for electronic device applications in ultra high brightness LEDs. It has showcased at SEMICON Japan 2011 held between December 7 through 9 at Makuhari Messe in Chiba for the first time. In the R&D line-up, there are bonded wafers that achieve new functions previously unavailable with a single material wafer, and GaN single crystal wafers that have low defect density and colourless transparency over the whole wafer surface.
订阅：
博文 (Atom)